POE-S1108GB (8GE POE + 1GE RJ45 & 1GE SFP Uplink, 150W Built-in Power Source, 20G Bandwidth, IEEE802.3af/at)
Overview:
POE-S1108GB, 8 port Gigabit unmanaged Power over Ethernet switch, comply with IEEE802.3af/at and equipped with 150W internal power source which enables it compatible with most Powered Device such as IP Camera, Wireless Access Point, VoIP Phone, etc.
It’s the upgrading of POE-S1108G that with internal instead of external power supply. It works base on three different modes include Normal free communication, VLAN port isolation and IP CCTV monitoring transmission, either one is switchable to each other as user required. Meanwhile, it also has alternative power supply mode AC100-240V and DC48-57V.
Every single port output power up to 30W max and deliver through pins 1/2"+", pins 3/6"-" over standard Ethernet cable Cat5, Cat5e, Cat6, Cat6e or those in higher quality which on the other hand will reduce much power loss in the transmission especially for the Ethernet power system that has a long distance between PSE(Power Source Equipment) and PD(Powered Device).
Key Features
- 8 Gigabit POE + 1 Gigabit RJ45 Uplink + 1 Gigabit SFP Uplink.
- Compliance with IEEE 802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af/at.
- AC100-240V, 50/60Hz or DC 48~57V two different input modes.
- Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure.
- Auto MDI/MDIX, Store-and-forward, 20G Bandwidth.
- Switchable system modes: Normal free communication, VLAN port isolation and Super remote transmission
- MAX 30W for every single port, total external input power amount 150W.
- All ports support wire speed switch, jumbo frame transmission.
- Grounding connection and lightning protection are both available.
- Plug and play, self-adaption, 19’’ rack mountable.
- PoE working status can be read and analyzed through LED indicators on front panel.
- Applied to CCTV IP camera, Wireless AP, VoIP phone, etc.
Specification
| Item | 8 Port GE(10/100/1000Mbps) Unmanaged Power over Ethernet Switch |
| Model | POE-S1108GB |
| Interface | 8 Gigabit PoE + 1 Gigabit RJ45 Uplink + 1 Gigabit SFP Uplink |
| Power Input | DC 48~57V and AC100-240V 50/60Hz two different power input modes |
| Power Output | DC 52V, 150W Built-in Power Supply, Max 30W for every single port |
| Data Exchange | 10/100/1000Mbps, Store and Forward |
| Power/Data Assignment | Power: pin 1,2/4,5 “+”, 3,6/7,8 “-”; Data: pin 1,2,3,6 |
| Bandwidth/MAC | 20Gbps, 8K |
| Ambient Environment | Operating temperature: 0~50℃ |
| Storing temperature: -40~70℃ |
| Operating Humidity: 10%~90% RH, No condensing |
| Storing Humidity: 5%~90% RH, No condensing |
| Standard Protocols | IEEE 802.3 IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASX IEEE 802.3af/at IEEE 802.3x IEEE 802.1q VLAN |
| System Setting | N: Normal free communication among all ports, apply to universal data exchange, 100-150m transmission distance. |
| V: 1-4 PoE Ports VLAN isolating from each other, effectively restrain cyber storm, ARP virus and other network failure; Apply to wireless AP and other equipment. |
| P: Max 250meters Super remote transmission mode, apply to long distance transmission in IP CCTV, Wireless network and other PoE systems. |
| Data Speed | Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex |
| Network Media | 10Base-T: Pair 2 Category 3(Cat3) and above UTP/STP(≤150m) 100Base-TX: Pair 2 Category 5(Cat5) and above UTP/STP(≤150m) 1000Base-T: Pair 4 Category 6(Cat6e) and above UTP/STP(≤150m) 1000Base-SX:62.5μm/50μm MMF(2m~550m) 1000Base-LX:62.5μm/50μm MM(2m~550m) or 10μm SMF(2m~5000m) |
| Safety Approved | CE, FCC, ROHS |
| Warranty | 1-3 years |
| Size/Weight | PoE Size: 210*140*45mm (L*W*H) Packing Box Size: 260*205*65mm (L*W*H) Net Weight:1.2kg, Gross Weight: 1.4 kg |
Application Diagram
|
|
POE-S1108GB(8GE+1GE+1GE SFP)_8 Port Gigabit IEEE802.3af/at PoE Switch with 150W Built-in power supply (Newly Developed) Images
|
